Enter a name in the box under Saved Sessions, and click the Save button on the right. If you want to save those settings for later, use the options under Load, save or delete a stored session. PuTTY is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. For boards with built in USB it doesn't matter so much but for ESP8266 and other board with a separate chip, the speed required by the board is 115200 bits per second. This called the baud rate, which is the speed in bits per second that data is sent over the serial connection. In the box under Serial line, enter the serial port you found that your board is using.Under Connection type: choose the button next to Serial.However, the 64-bit version will work on most PCs. If you run into issues, you can try downloading the 32-bit version instead. Download the file and install the program on your machine. It is most likely that you'll need the 64-bit version. You'll want to download the Windows installer file. The first thing to do is download the latest version of PuTTY. Verify that the ports have no conflicts Run diagnostics on. To send a few characters to a serial port: echo hello > com1. To send contents of a file to a serial port: copy file.bin com1 /b. If you're using Windows, you'll need to download a terminal program. Check if your ports are enabled, and properly configured in the BIOS Setup/Configuration Utility. It may also be that COM port access right are locked down, so you need administrative right to open the port.
0 Comments
Leave a Reply. |